What is the character and feature of Belt Conveyor Buffer Bed?

Buffer Bed is mainly used for vibration damping protection of conveyor belt at material discharging point. When the material fall down, buffer bed uses its own elasticity to minimize the impact force when material falls down on the belt to ensure normal operation of belt conveyor. In addition, the buffer strip of bed surface consist of five million ultra high molecular polyethylene plates,which contacts the belt surface well to reduce the friction coefficient to the minimum.Here PK Machinery introduce the main characters and features of belt conveyor buffer bed.  
Main characters of belt conveyor buffer bed
1.The smooth UHMW PE surface reduces friction coefficient of conveyor belt and impact strip to minimum.Thick polyethylene layer is more widely used and durable.
2.The front and back of polyethylene surface form into a curved surface, thus ensuring the smooth passing by of the conveyor belt.
3. The excellent performance of the special rubber layer can effectively absorb the momentum when material falling down.
4. Each part of buffer strip is combined with hot vulcanization, compact and firm.

 

Main characteristics of the belt conveyor buffer bed
1. No moving components, low daily maintenance cost.
2. Even bearing force, large supporting area, small belt sagging, damage and materials dropping.
3. Strong absorption of impact energy.
4. Suitable for all kinds of belt width and angle.
5. It can withstand strong impact.
6. Quick and easy installation, easy to check and replace.
7. It can be installed at the conveyor belt blanking point.
8. Prolong the belt life.

Follow the Right Operation of Fixed Belt Conveyor, Otherwise Accident will Occur

1.Fixed belt conveyor should be fixed in accordance with the specified installation methods on the foundation;
2.Before start-up ,please check all the moving parts of belt conveyor, such as if belt buckles and bearing device is normal, if the protective device is complete, if the belt tensioning condition is adjusted properly before start-up;
3. Fixed belt conveyor should no-load start up, only when operation is normal, can you feed the material, feed material before starting up the conveyor is not allowed;
4. when units of belt conveyor operate in series, please start from the discharged end in order, only when the operation is normal ,can you feed the material;

 

5. When belt deviation appeared in the operation of the belt conveyor, please stop the conveyor and adjust timely, so as not to wear edges and increase the load;
6. The work environment and material temperature should not be higher than 50℃ and lower than -10 ℃;
7. The conveyor must not convey people, and people is not allowed to stand under the conveyor;
8. Stop feeding material before stopping the conveyor, only after stored materials are discharged completely you can stop the conveyor;
9. Belt conveyor motor must be in good insulation;
10.Do not use your hand to pull the belt in order to avoid accidents when belt slips.