Type and Function of Fixed Belt Conveyor Roller

Roller is used to support the conveyor belt and carry of the material, to ensure the stability of the conveyor belt.
In general, the fixed belt conveyor roller is the following:
1.Trough roller: it is also known as carrying roller which is used for carrying bulk material;
2.Parallel roller: parallel upper roller is used for carrying materials, parallel lower roller is to support the return branch of the conveyor belt;
3.Self-aligning roller: it includes taper aligning supporting roller and friction aligning roller which are mainly used for adjusting the belt deviation to avoid S-shaped, so as to ensure the stable operation of conveyor belt;
4.Impact roller: it is installed in the lower part of the conveyor belt, which can reduce the impact of the conveyor belt to extend the service life of the conveyor belt;
5.Return roller: it supports the conveyor belt of lower branch,including parallel type, V type, inverse V type,etc. V and inverse V type roller can reduce the conveying belt deviation possibilities;
6.Transition roller: it is installed between the drum and the first set of roller, which makes the conveying belt gradually turns from through shape into or flat shape and reduce additional stress of the conveying band edge turns to trough shape due to the expansion, at the same time,it can prevent the material spreading phenomenon of conveyor belt.
In addition, the comb type roller and screw roller, which can remove the sticky material on conveyor belt to keep the conveyor belt clean. 

Follow the Right Operation of Fixed Belt Conveyor, Otherwise Accident will Occur

1.Fixed belt conveyor should be fixed in accordance with the specified installation methods on the foundation;
2.Before start-up ,please check all the moving parts of belt conveyor, such as if belt buckles and bearing device is normal, if the protective device is complete, if the belt tensioning condition is adjusted properly before start-up;
3. Fixed belt conveyor should no-load start up, only when operation is normal, can you feed the material, feed material before starting up the conveyor is not allowed;
4. when units of belt conveyor operate in series, please start from the discharged end in order, only when the operation is normal ,can you feed the material;

 

5. When belt deviation appeared in the operation of the belt conveyor, please stop the conveyor and adjust timely, so as not to wear edges and increase the load;
6. The work environment and material temperature should not be higher than 50℃ and lower than -10 ℃;
7. The conveyor must not convey people, and people is not allowed to stand under the conveyor;
8. Stop feeding material before stopping the conveyor, only after stored materials are discharged completely you can stop the conveyor;
9. Belt conveyor motor must be in good insulation;
10.Do not use your hand to pull the belt in order to avoid accidents when belt slips.