Follow the Right Operation of Fixed Belt Conveyor, Otherwise Accident will Occur

1.Fixed belt conveyor should be fixed in accordance with the specified installation methods on the foundation;
2.Before start-up ,please check all the moving parts of belt conveyor, such as if belt buckles and bearing device is normal, if the protective device is complete, if the belt tensioning condition is adjusted properly before start-up;
3. Fixed belt conveyor should no-load start up, only when operation is normal, can you feed the material, feed material before starting up the conveyor is not allowed;
4. when units of belt conveyor operate in series, please start from the discharged end in order, only when the operation is normal ,can you feed the material;

 

5. When belt deviation appeared in the operation of the belt conveyor, please stop the conveyor and adjust timely, so as not to wear edges and increase the load;
6. The work environment and material temperature should not be higher than 50℃ and lower than -10 ℃;
7. The conveyor must not convey people, and people is not allowed to stand under the conveyor;
8. Stop feeding material before stopping the conveyor, only after stored materials are discharged completely you can stop the conveyor;
9. Belt conveyor motor must be in good insulation;
10.Do not use your hand to pull the belt in order to avoid accidents when belt slips.